Elegoo Neptune 4 Pro FDM 3D Printer(+++)

Print volume 225*225*265mm
500 mm/s max printing speed
11 x 11 auto leveling
300°C high-temp nozzle
Support PLA/PETG/ABS/TPU/Nylon materials
USB and LAN transfer
Intelligent segmented heatbed
รองรับ e-TAX สำหรับลดหย่อนภาษี ลูกค้าต้องแจ้ง e-mail เพื่อใช้ในการส่ง e-TAX ทาง เมล์ (รบกวนแจ้งในรายละเอียดตอนสั่งสินค้า)
Main Features:
【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power allowing it to print at a amazing speed of up to 500mm/s (recommended 250mm/s) and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models.
【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion combined with the copper-titanium bi-metal throat pipe and unique air duct design improve heat dissipation and reduce nozzle clogging.
【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C the printer can handle a wide range of filaments including PLA PETG ABS TPU and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion resulting in faster printing speed.
【Intelligent Segmented Heatbed】With 100W+150W power output the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally the surface of the PEI magnetic platform is marked for guidance.
【Auto Bed Leveling + Auxiliary Leveling】With 121 (11x11) points auto bed leveling you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print beds level for improved print quality.
【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.

!!!! หมายปรับ ระบบไฟฟ้า เป็น 110V การโรงงาน ตั้งค่าระบบไฟฟ้าเป็น 220V เรียบร้อยแล้ว หากทำการปรับเป็น 110V จะทำให้ Power Supply เสียได้ และจะไม่อยู่ในการรับประกันครับ !!!